We've assembled a searchable list of every coupon currently active on Amazon.com. When you find one you want, click 'Clip Coupon' to clip the coupon to your Amazon account. Then add the product to your cart and save!

Found 7 active coupons in in BISS. Page 1 of 1.

$29.99
Save $2.00 with this coupon.

BuMat PLA 1.75mm, 1kg, 2.2lb Gray Filament Printing Material Supply Spool for 3D Printer PLAGY

Available until

BuMat Filament is the best, safest, and most consistent filament for your 3D Printer. This is the highest quality components for producing successful 3D print. It is compatible with all 1.75mm Printer like FlashForge USA, RepRap, RapMan, MakerBot, BFB 3000, Rostock, Ultimaker Printrbot, MakiBox, Buccaneer, Kossel, Mendel and many other printers.

$29.54
Save $2.00 with this coupon.

BuMat ABS 1.75mm, 1kg, 2.2lb White Filament Printing Material Supply Spool for 3D Printer ABSWH

Available until

BuMat Filament is the best, safest, and most consistent filament for your 3D Printer. This is the highest quality components for producing successful 3D print. It is compatible with all 1.75mm Printer like Flash Forge USA, RepRap, Rapman, Makerbot, BFB 3000, Rostock, Ultimaker Printrbot, Makibox, Buccaneer, Kossel, Mendel and many other printers.

$29.99
Save $2.00 with this coupon.

BuMat PLA 1.75mm, 1kg, 2.2lb Tanslucent Clear Filament Printing Material Supply Spool for 3D Printer PLACR

Available until

BuMat Filament is the best, safest, and most consistent filament for your 3D Printer. This is the highest quality components for producing successful 3D print. It is compatible with all 1.75mm Printer like Flash Forge USA, RepRap, Rapman, Makerbot, BFB 3000, Rostock, Ultimaker Printrbot, Makibox, Buccaneer, Kossel, Mendel and many other printers.

$20.59
Save $2.00 with this coupon.

BuMat PLA 1.75mm, 1kg, 2.2lb Silver Filament Printing Material Supply Spool for 3D Printer PLASV

Available until

BuMat Filament is the best, safest, and most consistent filament for your 3D Printer. This is the highest quality components for producing successful 3D print. It is compatible with all 1.75mm Printer like Flash Forge USA, RepRap, Rapman, Makerbot, BFB 3000, Rostock, Ultimaker Printrbot, Makibox, Buccaneer, Kossel, Mendel and many other printers.This item cannot be bent as it would take 3 to 5 twists in bending different directions in order to twist the the filament product. So it is not that easy to break or bend the filament. This is a factory sealed in an air-tight sealed plastic bag with a brown box. Do not set the wrong settings on 3D printer's temperature settings and melt the filament too much. It will have a goob of wet filament stuck on the printer head which pushes the filament back from inserting to the print head. The blockage of goob would prevent the filament from being inserted in correctly and thereby bent the filament after prolong attempts to insert into the printerhead. Also, clean the 3D printers very often so that you can insert the filament correctly when you want to use next time around. If it is not clean and have the wet goob blocking the print, it will eventually block and bend the filament. The filament material is hard. It will not break easily. Very thin layer that needs to be inserted in correctly. The temperature settings on his 3D printer needs to be correct and cannot not always be changing or varied. Because of the temperature difference in different types of Material (PLA- which customer bought versus ABS material, PVA material, Nylon material, and other types of plastic materials), it can range from 160 degrees for PLA against 250 degrees of PVA. If you use too low, it won't print, but if it's too high, it will melt to a blob and not be useable, which we think it is often the case. Check the printer's manual as well or checking with the manufacturer of his printer to get the suggestion of what temperature to use on PLA material. Few printers can only print at 230 degree, which will not work this PLA filament because it can only print at 160 to 180 degrees. This will definitely have an affect on the PLA filament in question when it bends if the filament cannot go through the print head with the blockage in the printer's print head. It's essentially buying an inkjet cartridge and trying to place it on a thermal printer. You know it will not work because of compatibility issue. This seemed to be either a compatibility issue between the material and 3D printer of the customer's choosing (even though material's printing temperature is listed for all buyers) and the customer's maintenance of the 3D printer in question, which the material cannot be properly inserted without bending if it was not cleaned regularly.

$22.38
Save $3.00 with this coupon.

BuMat PLA 1.75mm, 1kg, 2.2lb Yellow Filament Printing Material Supply Spool for 3D Printer PLAYW

Available until

BuMat Filament is the best, safest, and most consistent filament for your 3D Printer. This is the highest quality components for producing successful 3D print. It is compatible with all 1.75mm Printer like Flash Forge USA, RepRap, Rapman, Makerbot, BFB 3000, Rostock, Ultimaker Printrbot, Makibox, Buccaneer, Kossel, Mendel and many other printers.

$28.11
Save $2.00 with this coupon.

BuMat ABS 1.75mm, 1kg, 2.2lb Clear Filament Printing Material Supply Spool for 3D Printer ABSCR

Available until

BuMat Filament is the best, safest, and most consistent filament for your 3D Printer. This is the highest quality components for producing successful 3D print. It is compatible with all 1.75mm Printer like Flash Forge USA, RepRap, Rapman, Makerbot, BFB 3000, Rostock, Ultimaker Printrbot, Makibox, Buccaneer, Kossel, Mendel and many other printers.

$29.99
Save $2.00 with this coupon.

BuMat ABS 1.75mm, 1kg, 2.2lb Black Filament Printing Material Supply Spool for 3D Printer ABSBK

Available until

BuMat Filament is the best, safest, and most consistent filament for your 3D Printer. This is the highest quality components for producing successful 3D print. It is compatible with all 1.75mm Printer like Flash Forge USA, Afina, RepRap, Rapman, Makerbot, BFB 3000, Rostock, Ultimaker Printrbot, Makibox, Buccaneer, Kossel, Mendel and many other printers.