Found 11 active coupons in in Hobby. Page 1 of 1.
WALNUT HOLLOW-Deluxe Wood Burning Craft Kit. Woodburning is a relaxing way to produce attractive craft pieces for your home or to give as gifts. This kit has all the instructions and tools you need to get started. This kit contains one top-quality; reusable 950 degree Woodburning Pen with on/off switch and stand; four woodburning points: shading; universal; flow; and cone; two basswood plaques (one 7x5 inches and one 8x10 inches); eight patterns and two alphabet sets; transfer paper; and complete [instructions. Woodburning Pen is UL Listed (E76789). Recommended for [ages 14 and up with adult supervision. Imported.
This is the perfect tool for cutting, carving and shaping a variety of materials such as thin plastic, foam core board, wax, soap and foam pumpkins. Our knife points are riveted into the holder for safety and allow more pressure to be applied than the screw in collets do. Our Hotknife is a must for any craft, hobby or art enthusiast. The 120 Volt tool is UL approved and is fitted with the USA two pin plug. We recommend this tool for ages 14 and up.
Transmitter Specifications Channels: 4 Model type: car/boat RF range: 2.4-2.48GHz Bandwidth: 500KHz Band: 160 RF power: less than 20 dBm 2.4G system: AFHDS 2 Code type: GFSK Sensitivity: 1024 Low voltage warning: yes(less than 3.5V) DSC port: yes(USB; output: PPM) ST range: 90 TH range: 45(F: 30;B: 15) Charger port: yes Power: 3.7V(1200mAh) Weight: 347g ANT length: 26mm Size: 157*116*258mm Color: Orange Certificate: CE0678, FCC Receiver Specifications Accessories: FS-iR4 Channels: 4 Model type: car/boat RF range: 2.40-2.48GHz Band: 160 RF power: less than 20 dBm RX Sensitivity: -105 dBm 2.4G system: AFHDS2 Code type: GFSK Power: 4.0-8.4V DC Weight: 15g ANT length: 26mm Size: 35.4*29.6*13mm Color: black Certificate: CE0678, FCC AS-Bus PORT: yes Data Acquisition port: yes Package Includes 1 x FS-iT4 Remote Control System 1 x FS-iR4 Receiver 1 x Line of Code 1 x Bushings of Antenna 1 x Manual CDThis is special edition bundle with RCECHO Apps license key included for more fun!. RCECHO is a registered trademarks. Products only distributed by authorized seller.
This hot tool was designed for the plastics and Radio Control (R/C) modeler. Use the screw-in hot knife points for trimming, conversions and cutting. The screw-in solder pints and Rosin core solder are ideal for the spot solders needed for small electronic. The additional points (tapered and texture) can be used for a variety of tasks such as making holes and adding patterns. This 950 degrees F tool can also be used for Woodburning and stencil cutting. The 120 volt tool is UL approved and is fitted with the USA two pin plug. We recommend this tool for ages 14 and up.
Introduction: AFHDS (automatic frequency hopping digital system), is developed by FLYSKY for all the Radio Control model lovers and is patented by FLYSKY at home. The system is specially developed for all the Radio control models, that offers super active and passive anti-jamming capabilities, very low power consumption and high receiver sensitivity. With extreme rigorous testing by engineers and studying the markets for years, FLYSKY AFHDS is now considered to be the one of the best systems available in the market. Features: Transmitter Specifications: -Dimension: 154 x 127 x 270mm -Net Weight: 395g -ANT Length: 26mm (2.4GHz) -Channels: 3ch - Frequency: 2.4GHz - Modulation: GFSK - System Type: AFHDS - Sensitivity: 1024 - LCD Dimension: 100mm (L:95 x W:3mm) / 4 inches (L:3`12 x W:1`3 inches) - RF Power: no more than 10mW - Low Voltage Warning: Yes (less than 9.5V) - DSC port: Yes (3.5mm) - Charger Port: Yes - Power: 12V DC (1.5V x 8) - Model Type: RC Car / Boat - Certificate: CE (0678) FCC power by 8pcs AA batteries(batteries not included) Receiver Specifications: - Dimension: 37.6 x 22.3 x 13mm - Net Weight: 5g - ANT Length: 26mm - Channels 3ch - Frequency: 2.4GHz - Modulation: GFSK - System Type: AFHDS - Sensitivity: 1024 - RF Receiver Sensitivity: -105dbm - Power: 4.5 - 6V DC (1.5V x 4) - Model Type: RC Car / Boat - Certificate: CE (0678) FCC Package: 1 xFlySky GT3B FS-GT3B 2.4Ghz 3CH Transmitter 1 x 2.4Ghz Receiver 1 x Bind Plug 1 X Manual File in a CD
IT4 2.4G TX Radio Controller 3xTelemetry Sensor 1 year warranty
The FS-iT4 is powered by a single 3.7v 1200mah Lithium Polymer Battery and is charged via a micro USB port on the transmitter. The radio controller is available in 3 different colors: Titanium, Orange and now in Silver. The FS-iT4's large screen display features touch screen technology with a stylus to allow optimal performance. The Fly Sky iT4 radio is loaded with many features that allow the user to easily configure their radio control model. The iT4 is capable of storing 20 models in its internal memory and has the ability to graphically represent all trim, exponential and dual rate adjustments. The graphical representations are extremely useful in depicting how the car will react to the parameter changes. The switch and trim buttons surrounding the steering wheel are fully programmable allowing the user to program each specific button to do a specific task manually assigned. The steering wheel housing pivots allowing the driver to configure the steering wheel angle for the best comfort. Comfort can be further enhanced by the removable rubber pistol grip. The iT4 features a second generation automatic frequency hopping digital system transmitter (AFHDS 2) capable of receiving transmission parameter information, such as voltage, temperature and speed from the receiver. Key features include: Servo Reversing, End Point Adjustment, Sub-trim Adjustment, Exponential Steering, Steering Speed Adjustment, Steering Mix Adjustment, Throttle Neutral Range Adjustment, Throttle Exponential Adjustment, Throttle Curve Adjustment, ABS Braking Programming, Throttle Speed Adjustment, Throttle Centering Position Programming, Throttle Idle Up Programming, Engine Cut Programming, Boat Mode, Full Channel Mixing, Servo Movement Display, Race Timer, Key Programming and 20 Model Memory.
The brand new FS-i10 uses the FLYSKY 2.4GHz AFHDS 2 (AUTOMATIC FREQUENCY HOPPING DIGITAL SYSTEM 2 / or second -generation automatic frequency hopping digital system), to achieve the role of a modern two-way communications telemetry, which had already appeared in our previous FS-iT4. The design of the new FS-i10 is very innovative and features a lightweight ultra-thin body with 34mm grip & is considered to be one of the best looking 10-channel transmitters since the first image exposure on the internet. This item features a 3.55 inch WQVGA TFT 240 × 400 pixel color touch screen (touch-pen included), the new FS-iR10 10-channel 2.4G receiver ships with our 1700mAh LiPo(lithium ion) battery which weighs only 660grams, USB charging cable, speed sensor, temperature sensor,and voltage sensor. Hardware features include 8 switches & 5 knobs for optimal performance. Model type uses for: Drones, helicopter, airplane, and glider. RF range: 2.4--2.4835 GHz; RF power: less than 20dBm (100mW). 1 year warranty (US version product only).
AFHDS (Automatic Frequency hopping Digital System), is developed by FLYSKY for all the Radio Control model lovers and is patented by FLYSKY at home. The system is specially developed for all the Radio control models, that offers super active and passive anti-jamming capabilities, very low power consumption and high receiver sensitivity. With extreme rigorous testing by engineers and studying the markets for years, FLYSKY AFHDS is now considered to be the one of the best systems available in the markets. Specifications Channels: 3 Channels Model type: Car / Boat RF Range: 2.40 - 2.48GHz Bandwidth: 500Hz Band: 160 RF Power: Less than 20DB 2.4G System: AFHDS Code type: GFSK Senditivity: 1024 Low Voltage Warning: Yes (Less than 3.7V) DSC Port: Yes (3.5mm, Output: PPM) ST Range: 90 TH Range: 45 (F:30, B:15) Charger Port: Yes (USB) Power: 3.7V (800mAh) Weight: 346g ANT Length: 98.5mm Size: 151 x 183 x 116mm Certificate: CE, FCC Package Includes 1 x FS-GT3C Transmitter 1 x FS-GR3C Receiver 1 x Charging USB Cable 1 x 800mAh 3.7V Transmitter Li-Po Battery 1 x Extra Handle (Large Size) 1 x English Manual CD 1 x Color Box
eceiver Specifications Dimension: 37.6 x 22.3 x 13mm Net Weight: 5g ANT Length: 26mm Channels 3ch Frequency: 2.4GHz Modulation: GFSK System Type: AFHDS Sensitivity: 1024 RF Receiver Sensitivity: -105dbm Power: 4.5 - 6V DC (1.5V x 4) Model Type: RC Car / Boat Certificate: CE (0678) FCC
US Ship FLYSKY RC FS-GT3C 3ch 2.4GHz LCD GT3C Silver Transmitter & GR3C Rx (Silver)** AFHDS (Automatic Frequency hopping Digital System), is developed by FLYSKY for all the Radio Control model lovers and is patented by FLYSKY at home** The system is specially developed for all the Radio control models, that offers super active and passive anti-jamming capabilities, very low power consumption and high receiver sensitivity** - With extreme rigorous testing by engineers and studying the markets for years, FLYSKY AFHDS is now considered to be the one of the best systems available in the markets** - Channels: 3 Channels - Model type: Car / Boat - RF Range: 2.40 - 2.48GHz - Bandwidth: 500Hz - Band: 160 - RF Power: Less than 20DB - 2.4G System: AFHDS - Code type: GFSK - Senditivity: 1024 - Low Voltage Warning: Yes (Less than 3.7V) - DSC Port: Yes (3.5mm, Output: PPM) - ST Range: 90 - TH Range: 45 (F:30, B:15) - Charger Port: Yes (USB) - Power: 3.7V (800mAh) - Weight: 346g - ANT Length: 98.5mm - Size: 151 x 183 x 116mm - Certificate: CE, FCC Package Includes - 1 x FS-GT3C Transmitter - 1 x FS-GR3E Receiver - 1 x Charging USB Cable - 1 x 800mAh 3.7V Transmitter Li-Po Battery - 1 x Extra Handle (Large Size) - 1 x Color Box